4.3.8. CalcTimer.dat¶
The name of the calculation process, the process number, and the
calculation process time are outputted in order at each line in the
CalcTime.dat file. An example of the file format for the TPQ method is
as follows.
All [0000] 12.94052
sz [1000] 0.01795
diagonalcalc [2000] 0.00693
CalcByTPQ [3000] 12.90670
FirstMultiply [3100] 0.08416
rand in FirstMultiply [3101] 0.00172
mltply in FirstMultiply [3102] 0.07707
expec_energy_flct [3200] 9.06255
calc flctuation in expec_energy_flct [3201] 1.67779
mltply in expec_energy_flct [3202] 7.31207
expec_onebody [3300] 0.11640
expec_twobody [3400] 3.28796
Multiply [3500] 0.14840
FileIO [3600] 0.20493
================================================
All mltply [0001] 7.38883
diagonal [0100] 0.04153
Hubbard [0300] 7.34636
trans in Hubbard [0310] 7.34595
double [0311] 0.00000
single [0312] 0.00000
inner [0313] 7.34299
interall in Hubbard [0320] 0.00008
interPE [0321] 0.00000
inner [0322] 0.00000
pairhopp in Hubbard [0330] 0.00006
interPE [0331] 0.00000
inner [0332] 0.00000
exchange in Hubbard [0340] 0.00004
interPE [0341] 0.00000
inner [0342] 0.00000
================================================
